Remove the NICE1 Cooling Unit, external power supply, power cord, and hose from the box or carry case. The wrap is separate and may not be packaged with the unit. Verify that all the necessary equipment is present and not damaged. Find a stable location for the Cooling Unit and ensure that nothing is blocking the airflow in the front and back of the device.

Open the water reservoir and fill with water. Replace the reservoir cap after filling. Connect the power cord to the external power supply. Plug the circular connector into the back of the Cooling Unit. You will hear a click when properly connected.

Place the wrap on the appropriate body part. Secure with hook and loop. Connect the hose to the wrap. You will hear a click when properly connected. See wrap specific instructions for use for additional information.

Turn on the power switch on the back of the device. The touch screen will illuminate and display the “Nice” logo. Press Start. Review the checklist on the touch screen. Confirm and press NEXT.

Select desired COLD LEVEL and press NEXT. Level 1 = (14.4C) Level 2 = (12.4C) Level 3 = (10C) Level 4 = (7.7C) Level 5 = (5.5C)

Select desired COMPRESSION LEVEL and COMPRESSION TYPE and press NEXT.

Choose a MANUAL time setting of 5 – 40 minutes for a single therapy session OR choose a PRESET PROGRAM for multiple sessions and press NEXT.

Review and confirm your settings by pressing START or press BACK to change the settings.

Review and confirm your settings by pressing START or press BACK to change the settings.